A well-maintained air conditioning system is one key element of enjoying comfortable indoor conditions, especially during the hot and humid summer months.
Notably, it can be frustrating when your equipment breaks down after recent repair efforts have been made. However, the awareness of the likely causes might allow you to act quickly and seize the opportunity.
Therefore, in this article, we will discuss about the most likely causes of your air conditioner not functioning after repair and some potential solutions.
1. Not Reinstalling Components Correctly
Air conditioners have complex components, including compressors, evaporator coils, and fan motors. In repairing an air conditioner, some of these components are loosened by a technician and may not be reinstalled correctly.
Notably, unless the loose parts are installed properly, the unit won’t operate correctly or at all. Therefore, ensure that your repair technician correctly reassembles all the pieces after making the repairs.
2. Refrigerant Leak
A technician can recharge refrigerant the system but to detect a leak. Notably, refrigerant transfers heat and cools the air.
However, your air conditioner will neither cool nor operate if there is a leak in the refrigerant line. Thus, when you notice that your cooling capability is low or not working at all, have a technician inspect and seal the leaks.
3. Electrical Failures or Wiring Failures
Electrical components, such as fuses, circuit boards, and capacitors, are typically tightened during repairs. However, if the elements are not tightened properly, then the unit will not operate.
Notably, fixing electrical faults on your own is dangerous and never recommended. Therefore, let a professional examine the wires and change the defective parts.
4. Thermostat Calibration Issues
The indoor temperature is maintained by the thermostat, which regulates the air conditioner’s operation by switching it on and off as needed. It, therefore, has to be adjusted after aircon servicing.
However, the settings can be incorrect after servicing. Therefore, it’s important to verify thermostat settings after service to ensure they are correct.
5. Clogged Drain Line
The drain line refers to the line out of which water is drained from the system. However, water in the unit cause breakages if the pipe nis clogged.
Notably, there is always a chance that a technician already working on other parts may not clean the drain line at all. That then presents a case for water damage and system failure due to clogging within the system. Thus, ensure the technician keeps the drain line in clean condition that will ensure smooth flow of water.
6. Dirty Air Filter
Dirt and dust are filtered out of the air before entering your home. Dirty filters reduce airflow, making the system less effective and requiring extra work.
While the filter will be replaced during service calls by the technician, it becomes dirty quickly in homes located in areas with high dust concentrations. Therefore, check and replace the filter frequently to achieve maximum performance.
7. Misadjusted System Settings
Occasionally, the technician may perform specific repairs, and in the process, they may inadvertently alter system settings that have detrimental effects on performance.
Therefore, if your air conditioner continues to malfunction after maintenance, check the settings or ask the technician to describe any changes they have made.
8. Poor Parts or Maintenance
The equipment can be compromised earlier if it is maintained with inferior parts or less-than-optimal service techniques. To ensure your air conditioner keep an extended lifespan, always use high-quality replacement components and employ quality service techniques.
By using a seasoned and reliable aircon services company, you can minimize the likelihood of an issue arising after service is completed, which will give you peace of mind and a functioning system all year.
9. System Age and Wear and Tear
Usually, older air conditioners are more prone to breakdown, and frequent high repair bills will usually indicate your aircon unit is nearing its end. Therefore, since your system is near the end of its cycle, you must decide if repairing it is worthwhile.
Alternatively, it may be more cost-effective to invest in a new system, as you won’t be spending money on costly repairs more often.
Conclusion
Maintaining your air conditioner not only keeps your indoor space cool and costs you less but also shows you are committed to ensuring an overall healthy home throughout the year.
Lastly, at Ninja Cool, we offer a convenient online booking for comprehensive aircon services to ensure your aircon operates at its best throughout without avoidable breakdowns. Contact us today and schedule your aircon servicing with us.
Add Comment